How to Clone Your Drive Using Acronis® True Image™ for Sandisk

DOWNLOAD FOR WINDOWS®
DOWNLOAD FOR MACOS
الصفحة الرئيسية
Topics
Upgrades

Data Migration Made Easy for Your Sandisk SSD Upgrade

Cloning your boot drive is easy with Acronis True Image for Sandisk. Transfer your existing data from an old boot drive to a new Sandisk SSD.  

Materials Needed

  • Sandisk SSD (check compatibility with system)
  • External USB NVMe™ enclosure or external USB to SATA III adapter
  • Desktop or laptop computer, connected to the internet

Software Needed

Easy

Difficulty

30-60 Minutes

Time

Step-by-Step Guide to Cloning Your Drive 
 Using Acronis True Image for Sandisk

Follow along below or
watch the video.

STEP 1

Download and install Acronis True Image for Sandisk

  • Power up your computer and make sure your operating system is fully updated.
  • Visit the Sandisk Support website and download the Acronis True Image for Sandisk software.
  • Install the software on your computer.

STEP 2

Connect the new SSD

  • If you are cloning to an external drive, connect the new Sandisk SSD to your computer using a SATA to USB cable.
  • If you are cloning to an internal drive, install the new SSD inside your computer. Not sure how? Learn how to upgrade your system.

STEP 3

Launch Acronis True Image for Sandisk

  • Open the Acronis True Image for Sandisk software on your computer.

STEP 4

Start the cloning process and mode

  • Select the "Clone Disk" option from the main menu.
  • Choose the source disk (your current boot drive, Disk 1) and the destination disk (your new SSD, Disk 2).
  • Choose the "Automatic" cloning mode for a straightforward process.
  • Review the summary of the cloning operation.

STEP 5

Begin cloning

  • Click "Proceed" to start the cloning process.
  • Wait for the cloning process to complete. This may take some time depending on the size of the data being cloned (in under 5 minutes or up to 1 hour).

STEP 6

Complete the cloning process

  • Once the cloning process is complete, shut down your computer.
  • Ensure the new SSD is properly installed.

STEP 7

Boot from the new SSD

  • Power on your computer and enter the BIOS settings.
  • Change the boot order to prioritize the new SSD.
  • Save the changes and exit the BIOS settings.

STEP 8

Verify the cloning

  • Once your computer boots up, verify that the new Sandisk SSD is functioning correctly and that data has been successfully cloned.

That’s all it takes to seamlessly clone your current boot drive to a new SSD using Acronis True Image for Sandisk.

For more helpful tips, visit: Sandisk.com/Support.

Related Content

UPGRADE

How to Install an M.2 NVMe SSD in a PC Laptop

Follow this step-by-step guide to upgrade your laptop to a Sandisk M.2 SSD for more speed and storage. 

Read More

UPGRADE

Upgrade Your Desktop PC to an M.2 NVMe SSD

Follow this step-by-step guide to upgrade your desktop to a Sandisk M.2 SSD for high-capacity and high-performance storage.

Read More

UPGRADE

How to Upgrade Your Desktop HDD to a 2.5" SATA SSD

Upgrade your desktop’s 3.5” hard disk boot drive to a Sandisk 2.5” SATA SSD to give your PC a boost in speed and capacity.

Read More

UPGRADE

Upgrade Your PC Laptop Hard Drive to a 2.5” SATA SSD

Upgrade your laptop’s 3.5” hard disk boot drive to a Sandisk 2.5” SATA SSD to give your system a boost in speed and capacity.

Read More

Disclosures

Sandisk and the Sandisk logo are registered trademarks or trademarks of Sandisk Corporation or its affiliates in the US and/or other countries. Western Digital is a registered trademark or trademark of Western Digital Corporation or its affiliates in the U.S. and/or other countries. Acronis and True Image are registered trademarks of Acronis International GmbH in the United States and other countries. The NVMe word mark is a trademark of NVM Express, Inc. All other marks are the property of their respective owners.

Product specifications subject to change without notice. Pictures shown may vary from actual products.

مقارنة