Nothing in this warranty modifies or excludes your legal rights under the Australian Competition and Consumer Act or the New Zealand Consumer Guarantees Act. This warranty identifies SanDisk's preferred approach to resolving warranty claims which is likely to be quick and simple for all parties.

No other warranties either express or implied by law, including but not limited to those contained in the Sale of Goods Act, are made with respect to the Product. If you purchased your Product in New Zealand for the purposes of a business, you acknowledge and agree that the New Zealand Consumer Guarantees Act does not apply.

In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if goods fail to be of acceptable quality and the failure does not amount to a major failure. What constitutes a major failure is set out in the Australian Consumer Law.

Warranty

SanDisk warrants that the Product, in the course of its normal use, will for the term defined below, be free from defects in material and workmanship and will conform to SanDisk’s specifications. The limited warranty period for solid state drive (SSD) Products expires at the earlier of: (a) the term of your warranty period; or (b) when the SSD exceeds its endurance limit(s) (see SSD specifications). Please note, it is possible for a SSD Product to be used under conditions which cause the media to wear out (and the warranty to expire) prior to the expiration of the stated time period in the warranty period, as specified in the applicable endurance specification. Please refer to this link to determine the term of your warranty period https://support-eu.sandisk.com/app/answers/detailweb/a_id/2 The term of your warranty period shall commence on the purchase date appearing on your purchase receipt from an authorized distributor or authorized reseller. Proof of purchase shall be required to be eligible for this warranty and to establish the commencement date of this warranty. Warranty service will not be provided unless the Product is returned to an authorized distributor, authorized reseller or regional SanDisk return center where the Product was first shipped by SanDisk. SanDisk may at its discretion make extended warranties available for purchase. SanDisk shall have no liability for any Product returned if SanDisk determines that the Product was (i) not purchased from an authorized distributor or authorized reseller, (ii) not used in accordance with SanDisk specifications and instructions, (iii) not used for its intended function, or (iv) stolen from SanDisk, or that the asserted defect a) is not present, b) cannot reasonably be rectified because of damage occurring before SanDisk receives the Product, or c) is attributable to misuse, improper installation, alteration (including removing or obliterating labels and opening or removing external enclosures, including the mounting frame, unless the product is on the list of limited user-serviceable products and the specific alteration is within the scope of the applicable instructions, as found at https://support-eu.sandisk.com), accident or mishandling while in the possession of someone other than SanDisk.

PRODUCTS ARE COMPLEX AND FRAGILE ITEMS THAT MAY OCCASIONALLY FAIL DUE TO (A) EXTERNAL CAUSES, INCLUDING WITHOUT LIMITATION, MISHANDLING, EXPOSURE TO HEAT, COLD, AND HUMIDITY, AND POWER FAILURES, OR (B) INTERNAL FAULTS . SUCH FAILURES CAN RESULT IN THE LOSS, CORRUPTION, DELETION OR ALTERATION OF DATA. NOTE THAT YOU SHALL BE RESPONSIBLE FOR THE LOSS, CORRUPTION, DELETION OR ALTERATION OF DATA HOWSOEVER CAUSED, AND FOR BACKING UP AND PROTECTING DATA AGAINST LOSS, CORRUPTION, DELETION OR ALTERATION. YOU AGREE TO CONTINUALLY BACK UP ALL DATA ON THE PRODUCT, AND TO COMPLETE A BACKUP PRIOR TO SEEKING ANY GENERAL SERVICE AND TECHNICAL SUPPORT FROM SANDISK.

In Australia, if the Product is not of a kind ordinarily acquired for personal, domestic or household use or consumption, provided it is fair and reasonable to do so, SanDisk limits its liability to replacement of the Product or supply of equivalent or better Product.

This warranty shall extend to repaired or replaced Products for the balance of the applicable period of the original warranty or ninety (90) days from the date of shipment of a repaired or replaced Product, whichever is longer. This warranty is SanDisk’s sole manufacturer's warranty and is applicable only to Products sold as new.

Obtaining Service

SanDisk values your business and always attempts to provide you the very best of service. Should you encounter any problem, please give us an opportunity to address it before returning this Product. Most technical support questions can be answered through our knowledge base or e-mail support service at https://support-eu.sandisk.com. If the answer is not available or, if you prefer, please contact SanDisk at the applicable telephone numbers listed in the following link: https://www.sandisk.com/support/international-phone-numbers

If you wish to make a claim, you should initially contact the dealer from whom you originally purchased the Product. If you are unable to contact the dealer from whom you originally purchased the Product, please visit our product support Web site at https://support-eu.sandisk.com for information on how to obtain service or a Return Material Authorization (RMA). If it is determined that the Product may be defective, you will be given an RMA number and instructions for Product return. An unauthorized return (i.e., one for which an RMA number has not been issued) will be returned to you at your expense. Authorized returns must be shipped in an approved shipping container, prepaid and insured, to the address provided with your RMA number. If following receipt of a qualifying claim under this warranty, SanDisk or the dealer from whom you originally purchased the Product determines that your claim is valid, SanDisk or such dealer shall, at its discretion, either repair or replace the Product with an equivalent or better Product or refund the cost of the Product to you. You are responsible for any expenses associated with a claim under this warranty. The benefits provided to you under this warranty are in addition to other rights and remedies available to you under the Australian Competition and Consumer Act or the New Zealand Consumer Guarantees Act.

Your original box and packaging materials should be kept for storing or shipping your SanDisk Product. To conclusively establish the period of warranty, check the warranty expiration (serial number required) via https://support-eu.sandisk.com.

SanDisk Technologies, Inc.
951 Sandisk Drive 
Milpitas, California 95035
949-672-7000
support@sandisk.com

No Product may be returned directly to SanDisk without first contacting SanDisk for a Return Material Authorization ("RMA") number. If it is determined that the Product may be defective, you will be given an RMA number and instructions for Product return. An unauthorized return, i.e. one for which an RMA number has not been issued, will be returned to you at your expense. Authorized returns are to be shipped prepaid and insured to the address on the RMA in an approved shipping container Your original box and packaging materials should be kept for storing or shipping your Product. If upon inspection of your returned Product SanDisk suspects fraud or deems such Product to be counterfeit, SanDisk may, in its sole discretion, confiscate such Product or take such other actions as it deems necessary. To request an RMA, please click here.

Embargoed countries ineligible for RMA services

Current US governmental regulations prevent us from doing business with customers in the following countries and regions

If your country is not in the embargoed list and you cannot create an RMA, please contact a Western Digital distributor in that country for product replacement. For a complete list authorized distributors worldwide, please see our list of authorized distributors.

SanDisk's limited warranty provides that, subject to the following limitations, each Product will be free from defects in material and workmanship and will conform to SanDisk's specification for the particular Product.

Limitation of Remedies

YOUR EXCLUSIVE REMEDY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT.

SanDisk may elect which remedy or combination of remedies to provide in its sole discretion. SanDisk shall have a reasonable time after determining that a defective Product exists to repair or replace a defective Product. SanDisk's replacement Product under its limited warranty will be manufactured from new and serviceable used parts. SanDisk's warranty applies to repaired or replaced Products for the balance of the applicable period of the original warranty or ninety days from the date of shipment of a repaired or replaced Product, whichever is longer.

Limitation of Damages

SANDISK'S ENTIRE LIABILITY FOR ANY DEFECTIVE PRODUCT SHALL IN NO EVENT EXCEED THE PURCHASE PRICE FOR THE DEFECTIVE PRODUCT. THIS LIMITATION APPLIES EVEN IF SanDisk CANNOT OR DOES NOT REPAIR OR REPLACE ANY DEFECTIVE PRODUCT AND YOUR EXCLUSIVE REMEDY FAILS OF ITS ESSENTIAL PURPOSE.

No Consequential or Other Damages

NOTWITHSTANDING ANYTHING ELSE IN THIS POLICY OR OTHERWISE, SANDISK WILL NOT BE LIABLE WITH RESPECT TO THE PRODUCTS UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY (I) FOR ANY AMOUNT IN EXCESS OF THE PURCHASE PRICE FOR THE DEFECTIVE PRODUCT OR (II) FOR ANY GENERAL, CONSEQUENTIAL, PUNITIVE, INCIDENTAL OR SPECIAL DAMAGES. THESE INCLUDE LOSS OF RECORDED DATA, INTERRUPTION OF USE, THE COST OF RECOVERY OF LOST DATA, LOST PROFITS AND THE COST OF THE INSTALLATION OR REMOVAL OF ANY PRODUCTS, THE INSTALLATION OF REPLACEMENT PRODUCTS, AND ANY INSPECTION, TESTING, OR REDESIGN CAUSED BY ANY DEFECT OR BY THE REPAIR OR REPLACEMENT OF PRODUCTS ARISING FROM A DEFECT IN ANY PRODUCT. THIS SECTION DOES NOT LIMIT LIABILITY FOR BODILY INJURY OF A PERSON.

IN THE UNITED STATES, SOME STATES DO NOT ALLOW EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE LIMITATIONS ABOVE MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

Your Use of the Product

SanDisk will have no liability for any Product returned if SanDisk determines that:

• The product was stolen from SanDisk.
• The asserted defect:
  • is not present,
  • cannot reasonably be fixed because of damage occurring when the Product is in the possession of someone other than SanDisk, or
  • is attributable to misuse, improper installation, alteration (including removing or obliterating labels and opening or removing external covers (unless authorized to do so by Western Digital or an authorized Service Center)), accident or mishandling while in the possession of someone other than SanDisk.
• The Product was not sold to you as new.
• The product was not used in accordance with Western Digital specifications and instructions.
• The product was not used for its intended function (for example, desktop drives used in an Enterprise environment).

Additional Limitations on Warranty

Western Digital's warranty does not cover Products which have been received improperly packaged, altered, or physically damaged. Products will be inspected upon receipt. Here are some examples of products that Western Digital will not accept for warranty claim:

Packaging

• Improperly packaged
• Non-qualified shipping container

Alterations

• Counterfeit label(s)
• Customer added jumper wires
• Incorrect PCBA/HDA pair
• Labels have been switched:
  1. True Western Digital label on non-Western Digital drive
  2. True Western Digital label on different capacity Western Digital Drive
• Labels exhibit tampering
• Label missing standard printing such as UL or capacity
• Missing barcode or top cover label
• No tape seal – (non-authorized data recovery sticker)
• Serial number on top cover does not match barcode on end
• Western Digital labels or breather filter holes obscured by customer applied stickers

Damage

• Broken pins on connector
• Connector(s) are damaged, cracked, missing or broken
• Cracked components on the circuit board
• Dented base casting
• Torn or punctured tape seal
• Dented top cover
• Deep scratch
• Loose, damaged, or missing screws
• Lifted or punctured servo clock hole (SCSI)
• Missing servo clock hole (SCSI)
• Missing PCBA (Circuit Board)
• Obscured breather filter holes
• Punctured at servo writer access port
• Punctured inspect pivot seal
• Scratch exposing copper trace
• Stripped mounting hole threads

If an alphabetic character appears after the Product date code (example: 05 Apr 99 X), the Product has been re-certified and may not be subject to the terms of SanDisk's warranty as it applies only to products sold as new.